FOR USE IN MOST INK JET PRINTERS USING OEM’S AND DYE-PIGMENTED INKS
There are many different types of inkjet printers on the market, and new ones are being introduced everyday.Not all inks work equally well! While our inkjet paper works in MOST inkjet printers, there is no guarantee that the inks will be colorfast (we recommend using OEM's or pigmented inks when ever possible, as there are many inferior inks on the market). We strongly suggest that you test your inks (wash test) prior to producing multiple transfers to ensure that the ink does not run.
-In print options,select plain paper as your paper type and turn the mirror image option on or mirror your image with your graphic software.
-Set the printing mode to Photo Quality in Printer Properties.
-Print in either 360 dpi or 720 dpi mode ( do not print higher than 720 dpi,as it will not enhance the transfer color, and it may
ultimately cause bleeding due to excessive dye accumulation).
-After printing,allow the transfer to dry thoroughly for approximately 45 to 60 minutes.
Note: For a high-gloss finish,combine with the Opaque Material and Digital Gloss Sheet ( see instructions for Digital Gloss Sheet).
-Set temperature to 350°F to 360°F.
-Set at medium pressure( approx. 40 lbs. of pressure).
-Cut the image out and leave a 1/8” border. For it ems such as mouse pad sand coasters, there is no need for cutting.
-Position the transfer paper on the fabric,image facing down.
-Press for 12-16 seconds.
-Peel off the transfer paper immediately.